Punching and Cutting Method For Steel Plates

 

1. A good punching and cutting method for steel plates

 

There are many methods for punching and cutting steel plates, and each method has its characteristics and scope of application. Therefore, there is no comparability between them. It can only be said that under what circumstances or conditions, which method is used for comparison Appropriate, can make the steel plate have good processing quality. In addition, in determining the punching and cutting method, the steel plate material, characteristics, thickness, and use environment must be considered to determine the appropriate steel plate cutting method.

 

2. How much power can a laser cut a steel plate?

 

For steel plate cutting, if laser cutting is used, the laser power must be at least 500w before the steel plate can be cut. From the current point of view, the laser commonly used power is more than 1000w. Moreover, we also need to know that the cutting power of the steel plate determines the laser power, and that the two are directly proportional.

 

3. Which cutting method is generally used for cutting cast iron steel plates?

 

For the cutting of cast iron steel plates, plasma cutting is often used, because this cutting method is suitable for use, and it can have good use effect and cutting quality. If you cannot use the plasma cutting method, you can use electric welding electrodes for arc cutting, and you can also have a good cutting effect on steel plate cutting.

 

4. 300mm thick steel plate, which need to pay attention to in the cutting process?

 

In steel plate cutting, if the thickness of the steel plate is 300mm, it is an ultra-thick steel plate. Therefore, compared with ordinary steel plates, it will increase some difficulties in cutting, but it is not impossible to perform cutting work. To cut a steel plate, you need to pay attention to such aspects as preheating and cutting speed. In addition, there are two cutting processes and cutting technology. If necessary, you can find a professional special steel processing company to ensure the cutting quality and good cutting effect.